Classification of processing techniques for aluminum alloy wheels

Dec 05, 2025

Gravity Casting
Casting is the most fundamental process in the metal processing industry. As early as prehistoric times, people knew how to use casting methods to make weapons and other items using copper. This technique involves heating the metal to a molten state and pouring it into a mold to allow it to cool and solidify. The so-called "gravity casting" is a process where liquid aluminum fills the entire mold under the influence of gravity. Although this production method is cheap and simple, it is difficult to ensure consistency within the wheel rim, prone to producing bubbles, and has relatively low strength and yield. Nowadays, this technology has been gradually phased out.


Low-pressure casting
Low-pressure casting is a casting method that uses gas pressure to force liquid metal into the mold and causing the casting to crystallize and solidify under a certain pressure. This method enables the liquid metal to quickly fill the mold. Since the gas pressure is not too intense, it can increase the metal density without involving air. Compared with gravity casting, the internal structure of the wheel in low-pressure casting is more compact and stronger. Low-pressure casting has higher production efficiency, a higher product qualification rate, good mechanical properties of the casting, a high utilization rate of the molten aluminum, and is suitable for large-scale batch production. Currently, most mid-to-low-end cast wheel wheels are produced using this process.


Rotational casting
Rotational casting is somewhat similar to the shaping process in ceramic manufacturing. It is based on gravity casting or low-pressure casting, and through the rotation of the aluminum itself and the extrusion and stretching of the rotating cutter, the wheel rim is gradually elongated and thinned. The wheel rim undergoes hot rotational molding, and its structure has obvious fiber flow lines, significantly enhancing the overall strength and corrosion resistance of the wheel. Due to its high material strength, light product weight, and small material molecular gaps, it is a highly praised process in the current market.

 

What are some little-known facts about rims that you don't know?Integrated forging
Forging is a processing method that uses forging machinery to apply pressure to metal billets, causing them to undergo plastic deformation to obtain forged parts with certain mechanical properties, specific shapes, and dimensions. After forging, the aluminum billet has a more compact internal structure, and the forging process can better conduct heat treatment on the metal, enabling it to achieve better thermal properties. Since the forging process can only process a whole metal billet and cannot form special shapes, after forging, the aluminum billet still needs to undergo complex cutting and polishing processes, and its cost is also much higher than the casting process.


Multi-piece forging
Integrated forging requires cutting off a large amount of excess dimensions, which results in relatively high processing time and cost. To achieve the same mechanical performance as integrated forged wheels, while reducing processing time and costs, some car wheel brands have adopted the multi-piece forging processing method. Multi-piece forged wheels come in two types: the former consists of spokes and rims, while the latter consists of the front piece, rear piece, and spokes. Due to the problem of seams in the three-piece wheels, additional sealing treatment is required after assembly to ensure airtightness. Currently, there are two main connection methods for the wheel rims of multi-piece forged wheels: one is a dedicated bolt/nut connection; the other is welding. Although the cost of multi-piece forged wheels is lower than that of integrated forged wheels, it falls short in terms of lightweighting.

 

 

Compression casting
The forging process is convenient for processing complex-shaped parts. The forging process enables the parts to have better mechanical properties. While extrusion casting combines the advantages of both. This process involves pouring liquid metal into an open container, and then a high-pressure ram presses the liquid metal into the mold to fill, shape, and cool and crystallize. This processing method effectively ensures the compactness inside the wheel, with mechanical properties close to those of a monolithic forged wheel. At the same time, there is not too much waste material that needs to be cut. Currently, a considerable number of wheels in Japan have adopted this processing method. Due to its high level of intelligence, many enterprises have regarded extrusion casting as one of the production directions for automotive wheels.

 

You Might Also Like