Heat Treatment And Mechanical Properties Stability Of Aluminum Alloy

Jan 03, 2025

After heat treatment of aluminum alloy forgings, due to heating at a higher temperature, bubbles often appear on the surface of the forgings. The bubbles are very thin, the gas escapes in the water, the bubbles have obvious stratification, the inner wall is corrugated, and there are gray-black combustion products. At the same time, there is often a phenomenon of surface peeling, which is also due to the rough surface of the mold groove, the temperature of the forging deformation process is too high, the degree is too large, the speed is too fast, the mold is not lubricated or poorly lubricated and the aluminum alloy is easy to stick to the mold.


The existence of these defects causes a large number of aluminum alloy forgings to be scrapped due to surface problems, and some need to negotiate with users to handle concessions and receive concessions to save processing and use, but it also causes adverse effects on enterprises. From the quality of the surface of aluminum alloy forgings, we can see the level of process technology and quality management of an enterprise, and we can see our own shortcomings. In particular, due to the surface quality problems of forgings, grinding and repair, resulting in the size not meeting the requirements of drawings, repeated times, a low pass rate, resulting in a waste of manpower and material resources. There are also some batch scrapes due to the final size deviation not meeting the use requirements, and some aluminum alloy forgings have a pass rate of less than 50%, which is caused by the lack of improvement in our process level and understanding.Do you know how to install the wheels and tyres correctly and safy?
The mechanical properties of aluminum alloy forgings do not meet the requirements of technical standards, which is also a problem that often occurs in physical and chemical testing, which generally needs to be solved by supplementary aging or repeated heat treatment. Therefore, heat treatment to improve the organization and performance of aluminum alloy forgings is crucial, which requires the heat treatment furnace temperature uniformity and accuracy to measure, meet the requirements of use, can be loaded, while the heating temperature, heating time selection should be appropriate, the transfer time should be as short as possible, the general selection of temperature control accuracy can reach ±3℃ heating furnace, To ensure that a heat treatment can have good mechanical properties, try to avoid repeated heat treatment, to reduce energy consumption and shorten the production cycle.


The output value of aluminum alloy forgings in the enterprise is relatively small, so the quality problems can not cause a high degree of attention. In the technical process research, equipment transformation, forging process, and heat treatment process, there is no in-depth systematic analysis and thinking. In particular, there is a lack of analysis on forging cracks, forging coarse crystals, surface quality and grinding treatment, machining deformation, and stress cracks. For these problems, the system should be upgraded and improved in terms of mold processing accuracy, lubricants, heating temperature, surface protection and treatment, to improve the quality stability of aluminum forgings and better participate in international market competition.

 

You Might Also Like