The correct method for installing wheels and tires？

Installing tires on forged aluminum alloy wheels requires careful attention to detail to ensure a safe and successful installation process. Here are the steps to follow:
1. Gather all necessary tools: Before starting the installation process, make sure you have all the necessary tools at hand. This includes a tire iron, valve stem tool, lubricant, and a torque wrench.
2. Prepare the wheel: Before mounting the tire, make sure the wheel is clean and free of any debris. Inspect the wheel for any damage or defects that may affect the tire installation.
3. Lubricate the tire bead: Apply a generous amount of lubricant to both sides of the tire bead. This will help the tire slide onto the wheel more easily and prevent damage to the tire bead.
4. Install the valve stem: Insert the valve stem into the hole on the wheel and secure it with the valve stem nut. Make sure the valve stem is properly seated and tightened to prevent air leaks.
5. Mount the tire: Start by lining up the tire with the wheel and using a tire iron to push the tire onto the wheel gently. Be careful not to pinch the inner tube or damage the tire bead during this step.
6. Inflate the tire: Once the tire is mounted on the wheel, inflate it to the manufacturer's recommended pressure using a tire gauge. Be sure to check for any leaks or signs of damage before proceeding.
7. Torque the lug nuts: Use a torque wrench to properly tighten the lug nuts to the manufacturer's recommended torque specification. This will ensure the wheel is securely attached to the vehicle.
8. Check for proper alignment: After installing the tire, check for correct alignment and balance to ensure a smooth and safe ride. Make any necessary adjustments before taking the vehicle out on the road.

By following these steps carefully and paying close attention to detail, you can successfully install tires on forged aluminum alloy wheels and enjoy a safe and comfortable driving experience.