30*4.0 Inch Forged Alloy Wheels For Motorcycle Bike

Product Name	Forged Motorcycle Blank Wheel
Material	Aluminum 6061 T6
Sizes	30*4.0 inch and 30*3.5 inch
Customized	Acceptable
Center hole	64.5 mm

 

JASTOO WHEEL

The Motorcycle alloy wheel blanks supplier, made in China

hot sales!

WHY CHOOSE OUR WHEELS?

1. Advantages of raw materials and forging process hard core (basic performance ceiling)
Aviation grade 6061-T6 aluminum alloy substrate
Unified use of national standard aviation aluminum bars, with full factory inspection of composition; Compared to ordinary cast A356 aluminum, it has higher yield strength and tensile strength, no internal pores or loose defects, continuous and dense metal fibers, and a microstructure far superior to castings.
Yield strength 260MPa 220MPa
Tensile strength 310MPa 276MPa
Elongation rate 10% 7%
Brinell hardness 90HBW 87.6HBW
10000 ton integral forging production line
Equipped with a complete set of 6000T/8000T/10000 ton forging presses, a single piece of aluminum rod is forged and formed under high temperature and high pressure, and the metal grains are extruded and smoothed out without delamination or internal voids;

Different from low-pressure casting and spinning semi-finished products, JASTOO has significantly improved its impact resistance and deformation resistance.
Dual consideration of lightweight and high strength.
20% -30% lighter than cast wheels of the same size, and nearly half lighter than steel wheels; Reduce unsprung mass, improve suspension response and steering sensitivity, while reducing tire wear by 26% and extending brake life by 20%, resulting in a comprehensive fuel saving of approximately 7%.
2. Safety and durability advantages (long-distance/off-road/heavy-duty adaptation)
Strong ultimate load capacity and impact resistance
The maximum load-bearing capacity of a single wheel for heavy-duty commercial and military vehicles can reach 2000-3600kg.

The original factory has a complete set of laboratory tests, including radial fatigue, bending fatigue, impact, salt spray, tensile, and ultrasonic testing. Each batch is randomly inspected to eliminate hidden cracks.
Excellent thermal conductivity, safer braking.
Aluminum alloy has a thermal conductivity three times that of steel, quickly dissipating high temperatures during braking, avoiding thermal attenuation and deformation, and providing more stable high-speed continuous braking.
3. Corrosion resistant and long-lasting surface treatment
Optional options include polished, matte painted, anodized, electroplated, and military green special coatings; Neutral salt spray test meets the standard, resistant to northern sea salt, winter snow melting agents, brake dust, and UV aging. It is not easy to peel or rust when used along the coast of Qinhuangdao.
4, Full category customization capability (modification/commercial/special full coverage)
Extremely wide size coverage
12-30 inch full specifications, suitable for producing small cars, motorcycles, pickups, rugged off-road vehicles, buses, heavy trucks, and military special vehicles; Support single piece, two piece, and three piece split forging wheel hubs.
1-on-1 Full Dimensional Customization
Parameters: PCD hole spacing, center hole CB, ET offset, load capacity, bolt specifications can be adjusted arbitrarily;
Appearance: 3D modeling with multi spoke/deep concave/off-road anti slip/retro edge throwing design;
Color scheme: matte black, gun gray, antique copper, polished silver, military green, custom logo engraving;
Low minimum order threshold: 2 motorcycle wheels, friendly for small batch customization of passenger cars, suitable for modification stores and fleet bulk procurement JASTOO.

5, Qualified and compliant, applicable both domestically and internationally
Complete set of authoritative certifications, suitable for domestic road and overseas exports:
Automotive industry system: IATF16949;
North American certification: DOT (US Road Compliance);
Complete set of mechanical and anti-corrosion testing reports according to national standards;
Commercial and military vehicle wheels meet the standards of the special vehicle industry and can be supplied in bulk to car companies, modification factories, and freight fleets

Contact Information

JASTOO WHEEL

sales@gftwheel.com

Hot Tags: 30*4.0 inch forged alloy wheels for motorcycle bike, China, suppliers, manufacturers, factory, customized, wholesale, buy, price, quotation, best, for sale, Aluminum Motorcycle Wheel Blanks, Billet Motorcycle Wheel, Forged Blank Wheels Motorcycle, Hoops Rims Motorcycle, Motorcycle Wheel Blanks, Motorcycle Wheels