Wheel Modification Mistake

Wheel modification is a more important step in car modification, whether it is appearance modification or control performance improvement, the wheel has played an important role as a high-quality wheel, after a rigorous production process and strict inspection, ensuring that its personality parameters indicators are qualified. 

There are often players in the use of "counterfeit" wheel when inexplicable cracks and deformation and other problems, occur and in the high-speed process, counterfeit is not enough to support such a large strength of the load; if there is a high-speed burst phenomenon, it will directly affect the life safety of drivers and passengers.

Therefore, in particular, if economic conditions are not allowed for the time being, please carefully choose modified wheels, and the performance of wheels is generally forged wheels > cast wheels > steel wheels.

The role of the wheel for improving the appearance is more obvious, but when selecting the wheel hub, every detail should be taken into account, the parameters of the wheel hub will affect the use of the wheel hub and the vehicle, the PCD value is incorrect may not be able to install normally, the ET value not only affects the installation and use, but also may affect the future upgrade and modification.

For example, the original car is a single-piston brake system, the owner intends to upgrade its multi-piston brake system in the future, and the ET value and hub size are too small, which will affect the normal installation, so when upgrading the brake system, it is necessary to replace or upgrade the hub twice.

Many bad business in the modified wheel hub, will not remind the owner of the size of the center hole diameter, if the size is smaller than the original size, naturally can not be installed, but if the size is larger than the original and did not take comparative measures, it will cause a different heart when the vehicle is driving, resulting in abnormal noise and shaking of the vehicle.

In serious cases, it will directly affect the safety of the vehicle. If you really like the hub you like, and there is no suitable center hole size, if the size is too small, you can ream, and if the size is too large, you can choose some manufacturers to provide the center hole sleeve ring to correct.

Some people think that the modification of large wheels is called upgrading, and some people think that large wheels have a more visual impact, but whether it is visual or performance, choosing the wheel size suitable for your vehicle is moderate. In terms of appearance, oversized wheels make people feel that their feet are heavy, affecting the overall feeling.

In terms of performance, it is necessary to have a balance, large size wheels, to match the upgrade of tires, to choose larger, wider tires, wide tires to provide more stable grip at the same time, strong friction will make your car start to speed up very slowly, and fuel consumption has significantly increased, and the hub size is too large, other parameters do not adjust the case, The steering of the vehicle also has a great impact, the wheel size of each car has a limit, if the pursuit of size, then the performance and control must pay a great sacrifice.